Polylepis (lat. Polylepis) - gülçiçəyikimilər fəsiləsinə aid bitki cinsi.
Polylepis (lat. Polylepis) - gülçiçəyikimilər fəsiləsinə aid bitki cinsi.
Polylepis és un gènere d'arbres i arbusts de la família de les rosàcies restringit als Andes. Es pol·linitzen pel vent i són característiques les seves fulles pinnades amb moltes capes papiràcies.
Les espècies del gènere Polylepis freqüentment arriben a formar el límit arbori de la seva zona als Andes.
Polylepis tarapacana és especialment notable pel fet de ser la planta llenyosa que creix a major altitud del món
Els boscos de Polylepis formen petits fragments i aïllats. S'havien fet servir com a combustible per les poblacions locals. En alguns països es prenen mesures de conservació i reforestació.
Aquest gènere té una història taxonòmica complicada, per alguns botànics tindria entre 15 a més de 30 espècies.[1][2] Darrerament es reconeixen 28 espècies.[3]
Polylepis és un gènere d'arbres i arbusts de la família de les rosàcies restringit als Andes. Es pol·linitzen pel vent i són característiques les seves fulles pinnades amb moltes capes papiràcies.
Polylepis[1] (Polylepis) je rod rostlin z čeledi růžovité. Jsou to opadavé nebo stálezelené keře a stromy s lichozpeřenými listy a bezkorunnými pravidelnými květy. Rod zahrnuje asi 15 druhů a je rozšířen v jihoamerických Andách. Některé druhy tvoří ve vysokých polohách And (až do 5200 metrů nad mořem) polylepisové lesy, které jsou nejvýše položenými lesními porosty na světě a tvoří ekologicky cenná, ojedinělá společenstva.
Zástupci rodu polylepis jsou opadavé nebo stálezelené stromy a keře dorůstající výška od 1 do 27 metrů. Kůra je tmavě červená, mnohovrstevná, odlupčivá v tenkých plátcích. Listy jsou střídavé, nahloučené na koncích větví, lichozpeřené s 1 až 9 jařmy lístků. V obrysu jsou kosočtverečné nebo hranatě vejčité až obvejčité, 2 až 19 cm dlouhé a 0,8 až 9 cm široké. Palisty jsou srostlé v pochvu objímající větévku. Jednotlivé lístky jsou kopinaté, vejčité, obvejčité nebo podlouhlé, 0,6 až 3,7 cm dlouhé a 0,2 až 1,7 cm široké, celokrajné s podvinutým okrajem nebo vroubkované či pilovité, na rubu chlupaté, žláznaté nebo olysalé. Květenství jsou vzpřímená nebo převislá, až 36 cm dlouhá, tvořená 1 až více než 60 květy. Květy jsou oboupohlavné, 4 až 10 mm široké. Kalich je tvořen 3 nebo 4 lístky, na vnější straně chlupatý, žláznatý nebo vlnatý. Koruna chybí. Tyčinek je 6 až 36 a jsou přirostlé v češuli při bázi čnělky. Semeník je spodní, tvořený jedním plodolistem obsahujícím jediné vajíčko. Plodem je 2 až 14 mm dlouhá nažka, na povrchu hrbolkatá či s ostny nebo křídly.[2]
Polylepis rugulosa v bolivijském Altiplanu
Název Polylepis je složen z řeckých slov poly (mnoho) a lepis (vrstvy). Odkazuje k charakteristicky mnohovrstevné kůře.[2]
Rod polylepis zahrnuje 15 druhů. Je rozšířen v jihoamerických Andách od severní Venezuely po severní Chile a v horách severozápadní a střední Argentiny. Vyskytuje se v nadmořských výškách od 1800 až do 5200 metrů. Největší počet druhů roste v Peru (14 druhů, 3 endemické) a Bolívii (13 druhů, 4 endemické).[2][3]
Některé druhy rostou v alpínských společenstvech Středních And, známých jako puna. Zde tvoří tzv. polylepisové lesy, které jsou nejvýše položenými lesními porosty na světě. Do současnosti se dochoval pouze zlomek těchto porostů. Tato společenstva hostí mnoho vzácných rostlin i živočichů. Příkladem může být pták pitpit velký (Oreomanes fraseri), náležející mezi pěvce, který je svým výskytem vázán výhradně na tyto porosty.[2] Polylepisové lesy jsou také v severní části And v ekosystému páramo.[4]
Rod Polylepis je v rámci čeledi Rosaceae řazen do podčeledi Rosoideae a tribu Sanguisorbeae. Mezi blízce příbuzné rody náleží krvavec (Sanguisorba), acéna (Acaena) a Margyricarpus.
První taxonomická revize byla publikována v roce 1911 a bylo v ní popsáno celkem 33 druhů. V pozdějších revizích byl jejich počet redukován.[3]
Lesní porosty polylepisů jsou v Andách odvěkým zdrojem dřeva. Hlavní význam těchto porostů je však ekologický, neboť tvoří ojedinělá společenstva. Některé porosty jsou chráněny v národních parcích, např. Sajama v Bolívíi.
Polylepis (Polylepis) je rod rostlin z čeledi růžovité. Jsou to opadavé nebo stálezelené keře a stromy s lichozpeřenými listy a bezkorunnými pravidelnými květy. Rod zahrnuje asi 15 druhů a je rozšířen v jihoamerických Andách. Některé druhy tvoří ve vysokých polohách And (až do 5200 metrů nad mořem) polylepisové lesy, které jsou nejvýše položenými lesními porosty na světě a tvoří ekologicky cenná, ojedinělá společenstva.
Die Gattung Polylepis gehört zur Familie der Rosengewächse (Rosaceae). Das Verbreitungsgebiet der ungefähr 26 Arten erstreckt sich über die südamerikanischen Anden vom nördlichen Venezuela bis ins nordwestliche Argentinien.
Die kleinen Bäume und Sträucher erreichen Wuchshöhen zwischen 1 und 32 Metern und Kronendurchmesser zwischen 3 und 10 Metern. Die Arten der Gattung besitzen eine rötliche, abblätternde Rinde sowie einen gewundenen Stamm. Die kleinen, ledrigen, meist gefiederten Laubblätter sind harzbedeckt.
In traubigen Blütenständen sind die relativ kleinen Blüten angeordnet. Die Blüten enthalten drei bis vier Kelchblätter und 12 bis 18 Staubblätter. Kronblätter sind nicht vorhanden.[1] Sowohl die Bestäubung als auch die Ausbreitung der Früchte findet mit Hilfe des Windes (Anemophilie) statt.
Die Polylepis-Wälder stellen weit über die Anden verteilte, voneinander isolierte Refugialräume dar. Über die historische Entwicklung des Polylepis-Verbreitungsgebiets und deren Ursachen gibt es seit den 1950er Jahren eine akademische Debatte. Während die einen behaupten, die derzeitige Verbreitung in Rückzugsgebieten beruhe auf einer natürlichen Entwicklung, meinen die anderen, dass die Ursachen in der Tätigkeit des Menschen – Abholzung für Nutzholz, Brandrodung und Überweidung – in einem vormals weitgehend zusammenhängenden Waldgebiet zu suchen seien.
Die meisten Polylepis-Arten sind an das kalte Klima der Hochanden angepasst: Die abblätternde Rinde sorgt durch eingeschlossene Luft für Isolation. Die Polylepis-Wälder (queñuales), meist auf geschütztere Landschaftsabschnitte beschränkt, bilden ein wichtiges Refugium für eine Reihe krautiger Pflanzen sowie Tiere, wobei Polylepis die dominanten, bisweilen die einzigen Holzgewächsarten stellt. Lediglich einige Polylepis-Arten in feuchten Bergwäldern (Polylepis multijuga, Polylepis quadrijuga u. a.) sowie im Grenzbereich Boliviens mit Argentinien (Polylepis crista-galli und Polylepis hieronymi) treten gemeinsam mit Bäumen anderer Pflanzengattungen auf. Andererseits kommen Polylepis-Arten (z. B. Polylepis pepei, Polylepis tarapacana, Polylepis besseri) in Höhenbereichen vor, wo sonst keine weiteren Bäume mehr wachsen können. Polylepis tarapacana und Polylepis subsericans bilden noch bis in Höhenlagen zwischen 4000 und 4850 Metern kleine Wälder. Es wird oft behauptet, dass an den Hängen des Sajama im Sajama-Nationalpark in Bolivien Polylepis tarapacana eine Höhenlage von 5200 Meter erreicht, ein Bestand, der als einer der höchstgelegenen Wälder der Welt gilt. Tatsächlich liegen die höchsten Fundorte jedoch bei 4850 Metern. In der Kordillere des Vilcanota in Peru liegen die Obergrenzen für Polylepis bei 3600 bis 4850 Metern.
Die Polylepis-Wälder stellen einen wichtigen Erosionsschutz dar.
Die Polylepis-Wälder besitzen eine einzigartige Flora und Fauna mit Habitatspezialisten und hochgradigem Endemismus. Diese Wälder gelten als eines der am stärksten gefährdeten Ökosysteme der Hochanden, zumal sie in weiten Gebieten die einzige Bau- und Brennholzquelle darstellen. In jüngerer Zeit sind regionale Programme zum Schutz der Wälder angelaufen, wobei die lokale Bevölkerung mehr oder weniger einbezogen worden ist.
Die Gattung Polylepis sowie die Typusart Polylepis racemosa, gefunden in den peruanischen Anden, wurden 1798 von den spanischen Botanikern Hipólito Ruiz López und José Antonio Pavón y Jiménez erstbeschrieben.[1] Der Gattungsname Polylepis ist ein griechisch-lateinisches Mischwort und bedeutet „vielschuppig“.
Die Gattung Polylepis gehört zu Tribus Sanguisorbeae innerhalb der Familie der Rosaceae.
Es gibt etwa 16 bis 26 Polylepis-Arten:
Die Polylepis-Bäume werden von den indigenen Gemeinschaften (meist Quechua oder Aymara) für die Herstellung von Brennholz oder Bauholz genutzt; letzteres dient der Herstellung von Zäunen und Werkzeugen. Einige Polylepis-Arten dienen der Heilung von Nieren- und Atemwegserkrankungen sowie als Färbemittel. Die Polylepis-Wälder werden als Weidefläche für Lamas, Alpakas, Schafe und Rinder genutzt. Darüber hinaus dienen viele der dort lebenden Pflanzen als Heilpflanzen.
Auf Quechua werden die Polylepis-Arten qiwuña genannt (Aussprache- und Schreibvarianten: qiwiña, qiwña, qiñwa, qiwna, in 5-Vokalschreibweise jeweils mit e: qeñwa usw.)[3][4][5][6], im Kichwa Ecuadors kiñwa[7][8] oder sachakiñwa[9] und auf Aymara qiñwa.[10] Die daraus abgeleiteten spanischen Bezeichnungen lauten queuña, queñua, queñual und queñuar.[1][9] In Kolumbien, Venezuela und Ecuador werden die Pflanzen auf Spanisch yagual genannt.[9]
Die Gattung Polylepis gehört zur Familie der Rosengewächse (Rosaceae). Das Verbreitungsgebiet der ungefähr 26 Arten erstreckt sich über die südamerikanischen Anden vom nördlichen Venezuela bis ins nordwestliche Argentinien.
Qiwuña,[1] Qiwiña,[2][3] Qiwña,[2][4][5] Qiñwa[6][7][8] icha Qiwna[9], kichwapi Kiñwa[10] icha Sachakiñwa[11] (genus Polylepis) nisqaqa huk sach'akunam, 4500 mitru hanaqkama wiñaq. 26 rikch'aqniyuq rikch'anam, waysallpu yura rikch'aq aylluman kapuq. Qiwuñaqa ancha alli-allillamantam wiñan, qaranta pisi-pisillamanta k'uskiykuchispa. Chay pisillata paskasqa qaranqa sach'ata chirimantam amachan.
Ñawpa pachas Punapi ancha achka qiwuña-qiwuñas karqan, kunan pachataq chaymanta chunka ch'iqtallamantas aswan pisillas puchuq kachkan. Tawantinsuyu pachapiqa Inkakuna ama sach'a muthuychu ñiqsi karqan. Ispañulkuna hamuptinqa achka sach'akunas michina ruranapaq muthusqa karqan.
Kunan pacha mana chayllaña q'iru kaptinmi, runakuna qiwuñakunata yamt'apaq wasichanapaqpas muthunku. Llamakuna qiwuñap raphinkunatam mikhunku. Chaywan musuq qiwuña manañam wiñanchu. Lluqsiq qaranrayku qiwuña utqayllam rawran. Chayrayku achka qiwuñatañam kañarqanku.
Qiwuña-qiwuña Punapi allin allpapaq ancha chaniyuq kaptinmi, chay sach'a-sach'akunata amachananchikmi tiyachkan.
Mama llaqtap sach'a-sach'a kamayuqninkunaqa qiwuña ranti utqaylla wiñaq kalistukunatam churayta munan, runakunata q'iruwan kawsachinapaq. Chaywanpas huk kawsay pacha amachaq tantanakuykunam ayllu llaqtakunawan yanapanakuspa musuq qiwuña-qiwuñakunata churayta munan.
Polylepis rugulosa, Sajama mamallaqta parki, Buliwya
Polylepis tarapacana, Sajama mamallaqta parki, Buliwya
Qiwuña, Qiwiña, Qiwña, Qiñwa icha Qiwna, kichwapi Kiñwa icha Sachakiñwa (genus Polylepis) nisqaqa huk sach'akunam, 4500 mitru hanaqkama wiñaq. 26 rikch'aqniyuq rikch'anam, waysallpu yura rikch'aq aylluman kapuq. Qiwuñaqa ancha alli-allillamantam wiñan, qaranta pisi-pisillamanta k'uskiykuchispa. Chay pisillata paskasqa qaranqa sach'ata chirimantam amachan.
Qiñwa (latin aru: Polylepis, qhichwa aru: Qiwuña, Qiwña, Qiñwa), k'ita quqa.
Polylepis is a genus comprising 28 recognised shrub and tree species,[1] that are endemic to the mid- and high-elevation regions of the tropical Andes.[2] This group is unique in the rose family in that it is predominantly wind-pollinated. They are usually gnarled in shape, but in certain areas some trees are 15–20 m tall and have 2 m-thick trunks. The foliage is evergreen, with dense small leaves, and often having large amounts of dead twigs hanging down from the underside of the canopy. The name Polylepis is, in fact, derived from the Greek words poly (many) plus letis (layers), referring to the shredding, multi-layered bark that is common to all species of the genus.[2] The bark is thick and rough and densely layered for protection against low temperatures. Some species of Polylepis form woodlands growing well above normal tree line within grass and scrub associations at elevations over 5000 m; which makes Polylepis appear to be the highest naturally occurring arboraceous angiosperm genus in the world.[2]
The genus Polylepis contains about twenty species that are distributed across the Andes. It is in the rose family, Rosaceae. The genus belongs to the tribe Sanguisorbeae, which mainly comprises herbs and small shrubs.[3] Although the relationship of Polylepis to other genera of Sanguisorbeae is largely unknown, the analysis of Torsten Eriksson et al. (2003) showed evidence of a close relationship between Polylepis and Acaena,[4] which shows tendencies towards having fused stipular sheaths, reddish, flaking-off bark, and axillary, somewhat pendant inflorescences, features otherwise characteristic of Polylepis.[5] There are several characteristics that are important taxonomically to distinguish between species of Polylepis, for example: 1) The amount of leaf congestion, 2) presence or absence of spurs and their size and vestiture, 3) presence or absence and type of trichomes, (4) size, shape, thickness and vestiture of leaflets. The most important taxonomic character, however, is the leaflets.[2]
Studies suggest that repeated fragmentation and reconnection of páramo vegetation, caused by the Pleistocene climatic fluctuations, had a strong influence on the evolution and speed of speciation in the genus Polylepis as well as the páramo biota as a whole.
Tree species in the genus Polylepis are confined to the high tropical South American Andes Mountains, with the most abundant concentrations of Polylepis ranging from northern Venezuela to northern Chile and adjacent Argentina. One known group of extra-tropical populations of Polylepis is distributed in the mountains of Northwestern Argentina. Most species of Polylepis grow best at high elevations between 3500 and 5000 meters. However, there are occurrences of species at altitudes as low as 1800 meters.[2] These low altitude species are mixed with montane forest which indicates that components of the genus could have been present in western South America during the Miocene Period or even earlier.[2] It is extremely rare for tree species to live at such altitudes, making Polylepis one of the highest naturally occurring trees along with the conifers of the Himalayan Mountains. Polylepis racemosa grows as shrubby trees on steep, rocky slopes above cloud forest. Polylepis tarapacana is one that reaches 4,800 m; the highest elevation of tree growth in the world.[2]
There is much debate on whether Polylepis was forced to exhibit such extreme elevation habitats due to habitat destruction by human interference. Physiological tolerances for growth at these elevations are subject to considerable debate among scientists, but evidence indicates that even before severe decimation by man, high elevation trees were limited in their distribution by the presence of specialized microhabitats.[2] Due to the harsh environment in which many species of Polylepis grow the growth of the tree's stems and branches are generally contorted. This abnormal growth is often associated with windy, cold or arid habitats. The climate of the South American Andes changes drastically throughout the region creating many microhabitats. Overall, the climate consists of short southern summers when temperatures are warm and rainfall is high and long winters when temperatures are low and rainfall is limited. The temperature and amount of rainfall also depend on which side of the mountain (eastern or western side), elevation and latitude.[2]
Bark: The bark of Polylepis consists of numerous layers of thin, dark red exfoliating sheets. In some cases, the layered bark can be more than an inch thick. A majority of the larger branches have similar shredding bark. It would seem that the bark serves as insulation from both the nightly frosts and the intense daytime irradiation.[2] The thick bark of Polylepis also serves an important function as protection against fire. It is thought to originally have been a protection against epiphytic mosses, whose thick masses may damage trees by adding weight to the branches and providing a suitable environment for fungi which attack the trees.[6]
Branching pattern and leaf arrangement: Polylepis trees tend to have twisted, crooked stems and branches with repeated sympodial branching. Contorted growth is often associated with windy, cold, or arid habitats. The leaves are generally congested along the branch tips often at the end of long, naked branch segments.[2]
Stipule sheath: Each leaf has a pair of stipules fused around the branch forming a sheath. The crowding of the leaves results in a pattern of stacked, inverted cones due to the overlapping of the stipule sheaths. On the top of the sheaths on either side of the petiole there are often projections, or spurs. The presence or absence of these spurs and their size are important taxonomic characteristics.[2]
Leaves and leaflets: All species of Polylepis have compound, imparipinnate leaves, but the number of pairs of leaflets varies within and between species. The arrangement of the leaflets and the position from the terminal leaflet of the largest pair of leaflets determine the shape of the leaf. The outline of the leaf is usually rhombic in species with one pair of leaflets. Depending on the position of the largest pair, the leaf can be trullate to obtrullate in taxa with more than one leaflet pair.[2]
Leaf anatomy: The leaves of all species are built on a dorsiventral arrangement of cells, with the epidermis and palisade layer on the adaxial surface and the spongy tissue on the abaxial surface.[2]
The pollen of Polylepis can be described as monads, isopolar, and more or less spheroidal to slightly oblate in shape. They have both an elongated and rounded aperture and the limits of the endoaperture (the inner openings of compound the aperture) are obscure. The elongated part of the aperture is completely covered by a pontoperculum.[2]
The fruits of Polylepis are essentially achenes composed of the floral cup fused to the ovary. Fruits of all species are indehiscent (they do not open at maturity) and one seeded. The surface of the fruit of different species has ridges, knobs, spines or wings. There are no definite sites for the placement of these different types of protrusions that appear irregularly over the surface. The type of protrusion, wings verses spines, or knobs versus wings, is useful for distinguishing between species.[2]
The flowers of all species of the genus are born on inflorescences. In most cases the inflorescences are long enough to hang like a pendant, but in the westernmost populations of P. tomentella and in at least one population of P. pepei, the inflorescence is so reduced that it remains almost hidden in the leaf axil. In the species with pendant inflorescences, the flowers are born regularly along the rachis or clustered toward the terminal end. The flowers themselves are reduced and have many features associated with wind pollination. These include: the absence of petals, green rather than colored sepals, an absence of scent or nectar, numerous anthers with long filaments, abundant, dry pollen, a large, spreading, fine fringed stigma, compounded pinnate leaves and the growth of trees in strands.[2]
Wind-pollination was a useful and evolutionary event in the adaption to the highlands, where insects are much scarcer than in warmer climates. By relying on wind for pollination, species distribution and phylogeny reconstruction have different patterns than insect-pollinated genus.[7] Wind pollination allows genetic information to cover large distances and hurdle reproductive barriers.[7]
The fruits of all species must be wind dispersed because members of the genus are trees and are thus too tall for animals (presumably mammals) to brush against on the ground. However, the elaboration of spines on the fruits of many taxa would argue for animal dispersal although wind dispersal undoubtedly predominates in P. australis. Numerous birds forage or live in Polylepis trees and it is possible that they disperse fruits caught in their feathers.[2]
Mountain forest ecosystems have drastically changed due to human disruption such as cutting, burning and grazing, which causes fragmentation of the forest landscape.[8] Polylepis contains some unique forms of autoecological (population ecology) and synecological relationships. Since they are located at high altitudes, they are equipped with specializations that help them withstand the harsh conditions.[9] They are semiarid with a mean annual rainfall average between 200 and 500 mm. Tropical habitats found above 3600 m are subject to extreme diurnal changes. In midday, the temperatures may reach somewhere around 10-12 °C (or higher). This causes the soil lower than the top 30 cm to maintain a constant temperature of about 2-5 °C (or lower) all year. Thus plants must stay active throughout the year and do not become dormant. Given these harsh circumstances, the growth of trees in such areas should be impossible. The reasons for Polylepis’ ability to inhabit such conditions have been studied by many. Carl Troll, for example, considered Polylepis to be a distinct type of vegetation and he claimed one of the reasons for their survival is the presence of microclimatic phenomena such as the formation of cloud layers on slopes and along low drainage areas, prevented nighttime freezes and producing what he called "lower elevation" conditions.[2] Another study was done by Hoch and Korner which provided that Polylepis has slow growth making it a weak competitor. Therefore, if the temperatures become warmer and more humid, Polylepis tends to lose out to the species that are more vigorous.[9]
Polylepis forests exist primarily as small, widely isolated fragments, which are being rapidly depleted by rural communities. Remaining Polylepis forests are used for firewood and building material and provide protection against erosion and habitats for endangered animals. In some countries, conservation and reforestation measures are underway.
Since Polylepis inhabits extremely high elevations, it has played an important role in the culture of various Andean Indigenous groups by providing building material and firewood.[2] The woodlands themselves constitute a distinctive habitat for other organisms allowing for the creation of endemic fauna in the future. The trees are also used as decoration; planted in front of buildings and houses. As a result of people expanding their reach, Polylepis have been subjected to harvest for firewood, the clearing of woodlands for pastureland and the destruction of seedlings by domesticated animals. Few trees have been found growing on level ground and are subsequently located on "inaccessible" slopes.[10]
Polylepis is a genus comprising 28 recognised shrub and tree species, that are endemic to the mid- and high-elevation regions of the tropical Andes. This group is unique in the rose family in that it is predominantly wind-pollinated. They are usually gnarled in shape, but in certain areas some trees are 15–20 m tall and have 2 m-thick trunks. The foliage is evergreen, with dense small leaves, and often having large amounts of dead twigs hanging down from the underside of the canopy. The name Polylepis is, in fact, derived from the Greek words poly (many) plus letis (layers), referring to the shredding, multi-layered bark that is common to all species of the genus. The bark is thick and rough and densely layered for protection against low temperatures. Some species of Polylepis form woodlands growing well above normal tree line within grass and scrub associations at elevations over 5000 m; which makes Polylepis appear to be the highest naturally occurring arboraceous angiosperm genus in the world.
Polylepis [poliLEpis] estas genro kiu enhavas 28 agnoskitajn arbustajn kaj arbajn speciojn,[1] kiuj estas endemiaj de mez- kaj alt-altitudaj regionoj de tropikaj Andoj.[2] Tiu grupo estas unika en la familio de Rozacoj kiuj estas ĉefe vento-polenigitaj. Ili estas kutime tordita laŭ formo, sed en kelkaj areoj kelkaj arboj estas 15–20 m altaj kaj havas 2 m-dikajn trunkojn. La foliaro estas ĉiamverda, kun densaj malgrandaj folioj, kaj ofte havantaj grandajn kvantojn de mortintaj bastonetoj kiuj pendas suben el la suba flanko de la kanopeo. La nomo Polylepis estas fakte derivita el la grekaj vortoj poly (multaj) plus letis (tavoloj), referante al la disfoliiĝanta, mult-tavola arboŝelo kio estas komuna al ĉiuj specioj de la genro.[2] La arboŝelo estas dika kaj aspra kaj dense tavolenhava por la protektado kontraŭ malaltaj temperaturoj.
Kelkaj specioj de Polylepis formas arbarojn kiuj bone kreskas sub la normala arbolimo en herbejaj kaj arbustaraj asocioj ĉe altaĵoj de ĉirkaŭ 5000 m; kio faras ke la genro Polylepis aperas kiel la plej alta nature arba angiosperma genro en la mondo.[2]
Polylepis [poliLEpis] estas genro kiu enhavas 28 agnoskitajn arbustajn kaj arbajn speciojn, kiuj estas endemiaj de mez- kaj alt-altitudaj regionoj de tropikaj Andoj. Tiu grupo estas unika en la familio de Rozacoj kiuj estas ĉefe vento-polenigitaj. Ili estas kutime tordita laŭ formo, sed en kelkaj areoj kelkaj arboj estas 15–20 m altaj kaj havas 2 m-dikajn trunkojn. La foliaro estas ĉiamverda, kun densaj malgrandaj folioj, kaj ofte havantaj grandajn kvantojn de mortintaj bastonetoj kiuj pendas suben el la suba flanko de la kanopeo. La nomo Polylepis estas fakte derivita el la grekaj vortoj poly (multaj) plus letis (tavoloj), referante al la disfoliiĝanta, mult-tavola arboŝelo kio estas komuna al ĉiuj specioj de la genro. La arboŝelo estas dika kaj aspra kaj dense tavolenhava por la protektado kontraŭ malaltaj temperaturoj.
Kelkaj specioj de Polylepis formas arbarojn kiuj bone kreskas sub la normala arbolimo en herbejaj kaj arbustaraj asocioj ĉe altaĵoj de ĉirkaŭ 5000 m; kio faras ke la genro Polylepis aperas kiel la plej alta nature arba angiosperma genro en la mondo.
Polylepis es un género altoandino de plantas que incluye pequeños árboles y arbustos, comúnmente llamados queñual, queñua, quinual o quewiña (del quechua qiwiña), principalmente en Perú y Bolivia, aunque en países como Ecuador se le conoce como árbol de papel o en Argentina como tabaquillo. Su taxonomía ha sido declarada como muy compleja,[1] pero en la más reciente revisión taxonómica realizada por Tatiana Boza se presente al menos 45 especies diferentes a los largo de todo su rango de distribución en los Andes Tropicales [2]. El grupo se caracteriza por ser polinizado por el viento. Polylepis incluye plantas caracterizadas por poseer un tronco retorcido, aunque en algunas áreas algunos árboles pueden llegar a alcanzar 15-20 m de alto y troncos con 2 m de diámetro. El follaje es siempre verde, con pequeñas hojas densas y ramas muertas.[3]
El nombre Polylepis deriva de dos palabras griegas, poly (muchas) y letis (láminas), refiriéndose a la corteza compuesta por múltiples láminas que se desprenden en delgadas capas. Este tipo de corteza es común en todas las especies del género. La corteza es gruesa y cubre densamente el tronco, que protege el tronco contra bajas temperaturas e incendios. Algunas especies de Polylepis forman bosques que crecen a lo largo de la línea de árboles e incluso llegan a mayores elevaciones, rodeados por pastizales y arbustales. Algunos individuos de Polylepis tarapacana crecen por encima de 5000 m s. n. m., situando a Polylepis como el género con la distribución más alta de árboles angiospermas en el mundo.
El género Polylepis es taxonómicamente muy complejo. Incluye 45 especies distribuidas a lo largo de los Andes. Se encuentra dentro de la familia Rosaceae, la cual incluye a las rosas. El grupo se encuentra dentro de la tribu Sanguisorbeae, que comprende hierbas y pequeños arbustos. Polylepis posee una relación evolutiva muy cercana con el género Acaena, con el que comparte varias características morfológicas, especialmente una corteza rojiza que se desprende en láminas, inflorescencias axilares y parcialmente colgantes.
Entre los caracteres morfológicos que se utiliza para diferenciar las especies de Polylepis se encuentran:
Polylepis se caracteriza por estar compuesto por pequeños árboles y arbustos de aproximadamente 2 a 5 m de alto. Posee hojas compuestas, con foliolos pequeños, gruesos y cubiertos por resina y tricomas. El tronco es retorcido y cubierto por una corteza café-rojiza, que se desprende en delgadas láminas. Las flores son pequeñas, agrupadas en racimos y el número varía según la especie. Las flores son polinizadas por el viento y poseen características típicas de esta forma de polinización; es decir, flores con pétalos reducidos, estambres sobresalientes y un estigma amplio. Los frutos son aquenios, dispersados por el viento. Estos árboles poseen una adaptación al frío de las regiones de alta montaña. La corteza laminada forma un paquete alrededor del tronco que actúa a modo de aislante térmico, protegiendo a la planta contra heladas.
El género Polylepis se encuentra distribuido en Suramérica, específicamente a lo largo de la Cordillera Andina. El género se distribuye desde Venezuela y Colombia hasta el norte de Chile y centro de Argentina. Las especies se distribuyen a lo largo o por encima del límite superior del bosque continuo. A lo largo de la cordillera de los Andes y sistemas serranos relacionados, desde el norte de Venezuela, Colombia, Ecuador, Perú, Bolivia, hasta el norte de Chile, y el noroeste y centro de la Argentina, hasta la altiplanicie de la Pampa de Achala.
Sólo una especie, Polylepis australis, posee una distribución extra-tropical en las montañas de la región noroeste de Argentina. La mayoría de las especies crecen a altitudes elevadas, entre 3500 y 5000 m, aunque algunas especies se encuentran a menor altitud, hasta 1800 m. Las especies que se distribuyen en menores altitudes se encuentran comúnmente mezcladas con otras especies arbóreas. Por ejemplo, P. cristagalli se encuentra en bosques mezclados con Podocarpus y Alnus, entre 3,200 y 2,500 m. Es muy raro encontrar especies de árboles viviendo a altas elevaciones (por encima 4000 m.), sin embargo, Polylepis es uno de los pocos árboles que crece a grandes altitudes en el mundo, incluso por encima de las coníferas que habitan las montañas del Himalaya. Polylepis tarapacana es la especie registrada por formar los bosques más altos del mundo, llegando hasta los 5,200 m en el parque nacional Sajama.
Los bosques de Polylepis se caracterizan por formar pequeños parches, donde Polylepis suele ser la especie arbórea dominante o exclusiva. Muchas de las especies (p. ej., P. pepei, P. tarapacana, P. besseri) suelen habitar las zonas del límite superior del bosque continuo (zonas de transición entre los bosques montanos y zonas alpinas) y formar pequeños parches, comúnmente presentes en laderas de montañas y quebradas rocosas. Los bosques de Polylepis tarapacana pueden llegar a crecer a altitudes extremas (4000 - 4500 m s. n. m.), el bosque de P. tarapacana en las faldas del nevado Sajama (parque nacional Sajama, Bolivia) es considerado como uno de los bosques más altos del mundo, distribuido entre los 4200 y 5200 m.s.n.m.. En la Cordillera de Vilcanota en Perú, los queñuales se distribuyen entre 3600 y 4500 m.s.n.m.. Una excepción son las especies que habitan los bosques húmedos montanos (P. multijuga, P. quadrijuga y P. sericea) y el bosque tucumano-boliviano (P. cristagalli y P. hyeronymi) porque se entremezclan con otras especies de árboles tropicales.
Los factores que determinan la actual distribución de los bosques de Polylepis han sido discutidas por los científicos desde fines de los años 1950. Especialmente en relación a los mecanismos que han actuado para producir una distribución fragmentada y aislada de los bosques. En el presente, las hipótesis ambiental y antropogénica son las más aceptadas.
La hipótesis ambiental propone que los bosques se encuentran asociados a las laderas y quebradas rocosas porque estos actúan como cobertizos contra las fluctuaciones drásticas de temperatura, heladas nocturnas y vientos helados.
La hipótesis antropogénica sugiere que la distribución actual es el producto de la explotación intensiva de los bosques por parte de grupos humanos, quienes redujeron la cobertura boscosa a través de la extracción intensiva de madera, incendios, introducción de ganado vacuno y ovino y cultivos. Los bosques remanentes de Polylepis se encuentran frecuentemente en laderas y zonas rocosas porque constituyen áreas donde los incendios no pueden expandirse y son de difícil acceso para el ganado. Algunos autores sugieren que la distribución potencial de Polylepis fue mucho más amplia en el pasado, cubriendo extensas áreas en las tierras altas de Bolivia y Perú, y actualmente cubren aproximadamente el 10% del área potencial Bolivia y 2-3% en Perú.
Los bosques de Polylepis son ecosistemas que albergan una fauna y flora única, especialmente aves especialistas de hábitat y con altos niveles de endemismo. Estos bosques también representan uno de los habitantes más vulnerables de los altos Andes por la fuerte presión antropogénica existente, ya que constituyen el único recurso maderable en esas alturas.
El polen se caracteriza por ser mónada, con una forma isopolar y relativamente esférico achatado ligeramente a los polos. Tiene tanto una abertura alargada y redondeada y los límites de la endoapertura (las aberturas interiores de apertura compuesta) son oscuros. La parte alargada de la abertura está completamente cubierto por una pontooperculo.
Los frutos de Polylepis son esencialmente aquenios. Los frutos de todas las especies son indehiscentes y poseen una sola semilla. Los frutos de las diferentes especies tiene crestas, espinas o alas. El tipo de protuberancia es carácter diagnóstico para diferenciar especies.
Las flores de todas las especies del género están organizadas en inflorescencias. En la mayoría de los casos las inflorescencias son colgantes, en algunos casos como las inflorescencias son reducidas y se mantienen casi ocultas entre las axilas de la hojas. En las especies con inflorescencias colgantes, las flores nacen con regularidad a lo largo del raquis o agrupadas al final de las ramas. Las flores son reducidas y tienen muchas características asociadas con la polinización por el viento. Estos incluyen, pétalos y sépalos reducidos, ausencia de olor y néctar, anteras numerosas con largos filamentos, polen abundante y estigma seco y amplio.
La polinización por el viento fue un evento evolutivo que probablemente ayudó a Polylepis a colonizar las tierras altas, puesto que las especies no tuvieron que depender de polinizadores como animales, especialmente insectos, que son más escasos en regiones altas.
Los frutos de todas las especies son dispersados por el viento. Sin embargo, la presencia de espinas en los frutos de muchos plantas, sugiere la potencial disperción de los frutos por animales, especialmente en especies como P. australis. Muchas especies de aves buscan alimento o viven en los árboles de Polylepis y es posible que dispersen las frutas atrapadas entre sus plumas.[4]
Polylepis es económicamente importante porque posee múltiples usos. Constituye una fuente de leña para la cocción de alimentos y madera para la construcción de corrales, mangos de herramientas y dinteles. La corteza posee propiedades medicinales para curar enfermedades respiratorias y renales[cita requerida] y también se utiliza como tinte para teñir tejidos. Los bosques son zonas utilizadas para el pastoreo del ganado doméstico nativo (llamas y alpacas) e introducido (ovejas, vacas y cabras) y zonas de cultivo de maíz, papa y cebada, entre otros. Esto último ha llevado a la degradación de estos bosques.
La taxonomía del género Polylepis es muy compleja. Según un estudio del año 2006 son 26 las especies que lo integran.[5]
A continuación se presenta el número de especies registadas en los países andinos, organizada de norte a sur:
Este es el listado de las 26 especies, y los países en donde se distribuyen:
Dos taxones no pudieron ser definidos por falta de material:
Una especie tratada por otros autores que no fue reconocida:
Polylepis es un género altoandino de plantas que incluye pequeños árboles y arbustos, comúnmente llamados queñual, queñua, quinual o quewiña (del quechua qiwiña), principalmente en Perú y Bolivia, aunque en países como Ecuador se le conoce como árbol de papel o en Argentina como tabaquillo. Su taxonomía ha sido declarada como muy compleja, pero en la más reciente revisión taxonómica realizada por Tatiana Boza se presente al menos 45 especies diferentes a los largo de todo su rango de distribución en los Andes Tropicales . El grupo se caracteriza por ser polinizado por el viento. Polylepis incluye plantas caracterizadas por poseer un tronco retorcido, aunque en algunas áreas algunos árboles pueden llegar a alcanzar 15-20 m de alto y troncos con 2 m de diámetro. El follaje es siempre verde, con pequeñas hojas densas y ramas muertas.
El nombre Polylepis deriva de dos palabras griegas, poly (muchas) y letis (láminas), refiriéndose a la corteza compuesta por múltiples láminas que se desprenden en delgadas capas. Este tipo de corteza es común en todas las especies del género. La corteza es gruesa y cubre densamente el tronco, que protege el tronco contra bajas temperaturas e incendios. Algunas especies de Polylepis forman bosques que crecen a lo largo de la línea de árboles e incluso llegan a mayores elevaciones, rodeados por pastizales y arbustales. Algunos individuos de Polylepis tarapacana crecen por encima de 5000 m s. n. m., situando a Polylepis como el género con la distribución más alta de árboles angiospermas en el mundo.
Polylepis on Andeilla kasvava pienikokoisten puiden suku. Ne muodostavat metsiä 4500 metrin korkeuteen asti. Puut ovat ikivihreitä ja niillä on pienikokoiset lehdet ja paksu, punertava kuori, joka lohkeilee puun kasvaessa.[2]
Polylepis-metsät ovat matalia ja hidaskasvuisia. Ennen kuin alueella laidunnettiin karjaa, ne peittivät laajoja alueita, suojasivat maata eroosiolta ja tarjosivat elinympäristön monille nykyisin harvinaisille kasvi- ja eläinlajeille.[3]
Polylepis on Andeilla kasvava pienikokoisten puiden suku. Ne muodostavat metsiä 4500 metrin korkeuteen asti. Puut ovat ikivihreitä ja niillä on pienikokoiset lehdet ja paksu, punertava kuori, joka lohkeilee puun kasvaessa.
Polylepis-metsät ovat matalia ja hidaskasvuisia. Ennen kuin alueella laidunnettiin karjaa, ne peittivät laajoja alueita, suojasivat maata eroosiolta ja tarjosivat elinympäristön monille nykyisin harvinaisille kasvi- ja eläinlajeille.
Polylepis est un genre d’arbres et d’arbrisseaux que l’on retrouve dans les Andes en Amérique du Sud. Ces plantes sont pollinisées par le vent et peuvent être reconnues à leurs feuilles pennées et leur écorce multicouche feuilletée. Leur nom scientifique est tiré de cette caractéristique de l’écorce. En fait, « polylepis » est une combinaison de grec et de latin signifiant « plusieurs écailles ».
Les différentes espèces de Polylepis sont connues en Amérique du Sud sous le nom général de Queñoales (de leur nom quechua : qiwiña).
La plupart des espèces de Polylepis poussent dans les Andes au niveau de la limite des arbres, ou au-dessus.
Polylepis tarapacana est ainsi la plante vivant le plus haut au monde et possédant un tronc. Elle pousse entre 3 800 et 4 600 m au-dessus du niveau de la mer, soit largement au-dessus de la limite des arbres (qui se trouve entre 3200 et 3500 dans la région). Ces forêts de Polylepis sont séparées des forêts humides de la yunga ou des vallées andines sèches par la végétation rase de la puna.
Il existe une controverse pour savoir si la fragmentation de leur distribution actuelle est naturelle ou due à l'activité humaine. Certains scientifiques considèrent que les étendues ouvertes de l'altiplano qui séparent les forêts de Polylepis étaient à l'origine occupées par une forêt continue, qui aurait été défrichée ou brûlée par les premiers occupants de la région.
Les forêts de Polylepis, petites et fragmentées, sont rapidement épuisées par les communautés rurales. Celles qui subsistent fournissent du bois de chauffage, des matériaux de construction et une protection contre l'érosion des sols. Elles servent d'habitat pour des espèces animales menacées.
Dans certains pays, des mesures de conservation et de reforestation ont été mises en place.
L'histoire taxonomique du genre est complexe. Les botanistes lui ont attribué entre 15 et plus de 30 espèces[2],[3]. La plus récente mise à jour (2006) en reconnaît 28[4].
Polylepis est un genre d’arbres et d’arbrisseaux que l’on retrouve dans les Andes en Amérique du Sud. Ces plantes sont pollinisées par le vent et peuvent être reconnues à leurs feuilles pennées et leur écorce multicouche feuilletée. Leur nom scientifique est tiré de cette caractéristique de l’écorce. En fait, « polylepis » est une combinaison de grec et de latin signifiant « plusieurs écailles ».
Les différentes espèces de Polylepis sont connues en Amérique du Sud sous le nom général de Queñoales (de leur nom quechua : qiwiña).
Polylepis è un genere di piante appartenenti alla famiglia delle Rosaceae. Il genere comprende approssimativamente 28 specie di alberi e arbusti,[1] endemiche delle regioni di media ed alta quota della Ande tropicali.[2] Il genere si distingue nella famiglia per la sua impollinazione prevalentemente anemogama. Gli esemplari delle diverse specie di Polylepis presentano in genere tronchi nodosi e ritorti, ma in alcune zone gli alberi raggiungono i 15–20 m di altezza e i 2 m di diametro. Il fogliame è sempreverde, spesso con grandi quantità di ramoscelli morti che pendono dalla parte inferiore della chioma. Il nome deriva dalle parole greche poli (molti) e lepis (strati), e si riferisce alla corteccia composta da numerose lamine, aspetto comune a tutte le specie del genere.[2]
La corteccia è spessa e ruvida e ampiamente stratificata, e fornisce un'ottima protezione al tronco contro le basse temperature. Alcune specie di Polylepis formano boschi che crescono ben al di sopra della normale linea degli alberi, in associazione con prati e pascoli ad un'altitudine superiore ai 5000 m; questo sembra indicare il genere come quello con la distribuzione di Magnoliophyta arboree a più elevata quota nel mondo.[2]
Le diverse specie di questo genere hanno una notevole importanza per la popolazione andina, alla quale forniscono legna da costruzione e combustibile per cucinare e riscaldarsi.[2]
Il genere Polylepis è tassonomicamente molto complesso; appartiene alla famiglia delle Rosaceae e contiene più di venti specie, distribuite sulla Cordigliera delle Ande. Il genere appartiene alla tribù delle Sanguisorbeae, che contiene principalmente piante erbacee e piccoli arbusti.[3] Polylepis sembra mostrare una relazione evolutiva molto vicina al genere Acaena, con il quale condivide alcune caratteristiche morfologiche, come la corteccia stratificata rossastra e le infiorescenze ascellari, a volte pendule.[4]
Il genere Polylepis comprende le seguenti specie:
Le specie arboree del genere Polylepis sono distribuite particolarmente nelle zone tropicali dell'alta cordigliera andina, nell'America del Sud; la maggiore distribuzione è compresa tra il Venezuela settentrionale e il nord del Cile e dell'Argentina. Alcuni individui appartenenti al genere hanno una distribuzione esterna alla zona tropicale, precisamente nelle montagne dell'Argentina nord-occidentale. La maggior parte delle specie di Polylepis cresce a quote comprese tra i 3500 e i 5000 m; tuttavia si ha testimonianza di specie che crescono più in basso, a quote superiori ai 1800 m.[2] La presenza di specie di bassa quota, comunemente mescolate con altre specie arboree in alcune foreste montane, indica che i componenti di tale genere potrebbero essere presenti nel Sudamerica occidentale fin dal Miocene o prima.[2] È estremamente raro trovare piante arboree a così elevate altitudini; questo rende alcune specie di Polylepis gli alberi presenti a più elevata altitudine nel mondo, insieme con alcune conifere delle montagne dell'Himalaya. Polylepis tarapacana può raggiungere i 4800 m di altezza, la più alta quota di crescita per un albero nel mondo.[2]
Polylepis è un genere di piante appartenenti alla famiglia delle Rosaceae. Il genere comprende approssimativamente 28 specie di alberi e arbusti, endemiche delle regioni di media ed alta quota della Ande tropicali. Il genere si distingue nella famiglia per la sua impollinazione prevalentemente anemogama. Gli esemplari delle diverse specie di Polylepis presentano in genere tronchi nodosi e ritorti, ma in alcune zone gli alberi raggiungono i 15–20 m di altezza e i 2 m di diametro. Il fogliame è sempreverde, spesso con grandi quantità di ramoscelli morti che pendono dalla parte inferiore della chioma. Il nome deriva dalle parole greche poli (molti) e lepis (strati), e si riferisce alla corteccia composta da numerose lamine, aspetto comune a tutte le specie del genere.
La corteccia è spessa e ruvida e ampiamente stratificata, e fornisce un'ottima protezione al tronco contro le basse temperature. Alcune specie di Polylepis formano boschi che crescono ben al di sopra della normale linea degli alberi, in associazione con prati e pascoli ad un'altitudine superiore ai 5000 m; questo sembra indicare il genere come quello con la distribuzione di Magnoliophyta arboree a più elevata quota nel mondo.
Le diverse specie di questo genere hanno una notevole importanza per la popolazione andina, alla quale forniscono legna da costruzione e combustibile per cucinare e riscaldarsi.
Polylepis – rodzaj roślin należących do rodziny różowatych. Obejmuje ok. 20 gatunków[3] (w zależności od ujęcia od 15 do 33[4]) występujących na obszarze Andów w Ameryce Południowej (od północnej Wenezueli po północne Chile i Argentynę[5]). Są to drzewa i krzewy rosnące w górach nawet do 5200 m n.p.m.[5] – nie ma innych roślin drzewiastych występujących na większych wysokościach. Rośliny te służą za źródło drewna opałowego, ich kora wykorzystywana jest w ziołolecznictwie, niektóre gatunki są też uprawiane jako ozdobne, zwłaszcza P. australis o bardzo silnie łuszczącej się korze[3].
Rodzaj należący do podplemienia Sanguisorbinae, plemienia Sanguisorbeae, podrodziny Rosoideae, rodziny różowatych (Rosaceae Juss.), rzędu różowców, kladu różowych w obrębie okrytonasiennych[6][1][7].
Bardzo problematyczna jest klasyfikacja zaliczanych tu roślin. Różni autorzy wyróżniają od 15 do 33 gatunków. Problemy wynikają z powodu niewielkich różnic między gatunkami przy dużej zmienności wewnątrz populacji i zdolności tworzenia mieszańców między prawdopodobnie wszystkimi wyróżnianymi gatunkami[4].
Polylepis – rodzaj roślin należących do rodziny różowatych. Obejmuje ok. 20 gatunków (w zależności od ujęcia od 15 do 33) występujących na obszarze Andów w Ameryce Południowej (od północnej Wenezueli po północne Chile i Argentynę). Są to drzewa i krzewy rosnące w górach nawet do 5200 m n.p.m. – nie ma innych roślin drzewiastych występujących na większych wysokościach. Rośliny te służą za źródło drewna opałowego, ich kora wykorzystywana jest w ziołolecznictwie, niektóre gatunki są też uprawiane jako ozdobne, zwłaszcza P. australis o bardzo silnie łuszczącej się korze.
Polylepis é um género botânico pertencente à família Rosaceae.
«Polylepis — World Flora Online». www.worldfloraonline.org. Consultado em 19 de agosto de 2020Polylepis är ett släkte med 28 arter inom familjen rosväxter.[1] Arterna i släktet är mindre träd eller buskar och förekommer enbart i Anderna, från Venezuela i norr till Chile och Argentina i söder.
Växterna kännetecknas framför allt av deras parbladiga lövverk samt den pappersaktiga barken som bildar många lager runt stammen och är ursprunget till det vetenskapliga namnet Polylepis, en blandning av grekiska och latin med betydelsen "många skal".
Många av arterna i släktet är hårt nyttjade av lokalbefolkningen och flera av dem är uppsatta på IUCN:s rödlista.
Polylepis växer på många platser i bergskedjan Anderna i Sydamerika, norra Venezuela genom Colombia, Ecuador, Peru och Bolivia till norra Chile och nordvästra Argentina. Samtliga arter lever på hög höjd och vissa, till exempel Polylepis tarapacana, bildar några av världens högst belägna skogar med en altitud på upp emot 5 200 meter över havet. Skogarna anses vara viktiga ekosystem som innehåller en unik flora och fauna. Arter som lever i polylepisskogarna är ofta högt specialiserade och inte sällan endemiska.
Skogarna av Polylepis växer ofta ganska isolerat i spridda populationer högt i Anderna. Forskare har sedan 1950-talet debatterat om detta är en naturlig konsekvens av det hårda klimatet eller om den glesa populationen är orsakad av antropogen påverkan. En hypotes säger att mycket av högplatåerna i Anderna som nu är grästäckta tidigare var täckt av en till stor del heltäckande skog av Polylepis som sedan gradvis har huggits ner och bränts bort sedan människans ankomst till Sydamerika. Den åsikt som huvuddelen av forskarna tycks ställa sig bakom är dock att de isolerade populationerna huvudsakligen har naturliga orsaker.
Arterna inom Polylepis är små träd eller buskar och har en röd och pappersaktig bark som bildar skal runt den vridna stammen. Bladen är små, tjocka, parbladiga och täckta med harts. Blommorna är små och uppträder i grupper. Arterna pollineras och sprids av vinden.
Träden är väl anpassade för det hårda klimatet i Anderna. Bland annat skalas barken efterhand av och bildar ett isoleringsskydd runt stammen mot frosten.
Polylepis kännetecknas vidare av att de bildar dungar eller mindre skogsområden ovanför den egentliga trädgränsen där de är de dominerande eller enda vedartade växterna. Undantag är de arter som lever i den fjällnära regnskogen (exempelvis arterna Polylepis multijuga och Polylepis quadrijuga) samt regionen mellan Argentina och Bolivia (Polylepis crista-galli och Polylepis hieronymi) där de växer tillsammans med andra arter.
Träden är ekonomiskt betydelsefulla för ursprungsbefolkningen eftersom de är en viktig källa av ved för matlagning samt material för byggnader och olika redskap. Arterna används även som färgämnen samt som naturläkemedel mot olika andnings- och njursjukdomar. Skogarna skövlas också för att skapa områden som kan användas för bete till boskapen. Situationen försvåras av att arterna inom Polylepis ofta utgör den enda tillgängliga veden omkring de högt liggande byarna.
Ett flertal arter inom släktet listas som sårbara (VU) av IUCN.[2] Läget är än värre för vissa andra arter som är starkt beroende av polylepisskogarna för sin överlevnad, till exempel fågelarten sydlig kungscinclodes (Cinclodes aricomae) som bedöms vara akut hotad (CR) av IUCN.[2] I vissa regioner har skyddsprogram påbörjats för att hindra ytterligare avskogning av viktiga områden.
Släktet har en komplicerad taxonomisk historia där forskare har ansett släktet bestå av mellan 15 och över 30 arter.[3][4] Den senaste undersökningen erkänner 28 arter i släktet.[5]
Listan är inte heltäckande.
Polylepis är ett släkte med 28 arter inom familjen rosväxter. Arterna i släktet är mindre träd eller buskar och förekommer enbart i Anderna, från Venezuela i norr till Chile och Argentina i söder.
Växterna kännetecknas framför allt av deras parbladiga lövverk samt den pappersaktiga barken som bildar många lager runt stammen och är ursprunget till det vetenskapliga namnet Polylepis, en blandning av grekiska och latin med betydelsen "många skal".
Många av arterna i släktet är hårt nyttjade av lokalbefolkningen och flera av dem är uppsatta på IUCN:s rödlista.
Polylepis là một chi thực vật có hoa trong họ Hoa hồng.[1]
Polylepis là một chi thực vật có hoa trong họ Hoa hồng.